Eberspracher Airtronic D5 Service Manual Page 34

  • Download
  • Add to my manuals
  • Print
  • Page
    / 148
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 33
34 | PRODUCT INFORMATION
3 | AIRTRONIC: INSTALLATION KITS
Additional hot air supply parts can be fitted to the heater. Each part has
a part guide number and thus reduces the flow of hot air. To give you
an opportunity to check whether your planned installation makes an
unacceptable reduction in the hot air flow, we have defined a unit guide
number for every heater and a part guide number for the hot air supply
parts, as stated in the guide number tables:
0 = no increase in temperature,
− = no part guide number.
The sum of part guide numbers of the hot air supply parts connected to
the unit must not be larger than the unit guide number, as otherwise the
outflow temperature will be unacceptably high with an uneven distribution
of heat so that the overheating sensor triggers. If the sum of part guide
numbers is larger than the unit guide number, the sum can be reduced
by choosing a larger diameter or by changing from a 1-duct to a 2-duct
system.
GENERAL INFORMATION ON THE HOT AIR SYSTEM:
RULE OF THUMB:
Double the cross section or 2 parts placed parallel = 1/4 of the guide
number.
Example:
Hose ø 60,
Cross-section area A = 19.6 cm
2
, guide number 1.0
Hose ø 75,
Cross-section area A = 44.2 cm
2
, guide number 0.25
For smooth, welded pipes, the part guide number is only half of the flexible
pipe with the same diameter (i.e. double pipe length).
1-duct means:
one hot air duct leads to or from the heater. The part guide numbers stated
for "1-duct" apply.
2-duct means:
After the heater, the hot air pipe line branches into two ducts. The part
guide numbers stated under "1-duct" apply up to the branching point,
while the part guide numbers stated under "2-duct" apply after the
branching point. Please comply with the instructions for the air system and
ascertaining the sum of part guide numbers from page 42.
In a 2-duct hot air system or when using several outflows, at least one duct
must be unlockable.
The lockable section must not be taken into account in ascertaining the
sum of the part guide numbers.
1
2
3
4
5
6
7
8
9
10
11
12
13
2-duct1-duct
Page view 33
1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 147 148

Comments to this Manuals

No comments