Eberspracher Airtronic D5 Service Manual download pdf (Page 19)

Installation3

Combustion air system

Installing the combustion air system

The universal installation kit includes a combustion air

silencer, which must be fitted.

If necessary, the combustion air system can be

lengthened up to max. 2 m using a connector and a

flexible combustion air hose, internal Ø 25 mm (please

refer to the additional parts catalogue for the order

no.).

Fix the combustion air silencer to the heater using a

pipe clip and use a hose clip to fix at a suitable point.

• The combustion air silencer must always be installed.

• Comply with the regulations and safety instructions

for this chapter given on page 4 – 7.

Please note!

Caution!

Safety instructions for the combustion air system!

• The combustion air opening must be free at all times.

• Lay the combustion air intake to ensure that exhaust

fumes cannot be sucked in as combustion air.

• Do not point the combustion air intake against the

vehicle’s airstream.

• The combustion air intake must not become clogged

with dirt and snow.

• Install the combustion air system sloping slightly

downwards. If necessary, make a drain hole approx.

Ø 5 mm at the lowest point as a condensation outlet.

1 Combustion air silencer

2 Connection pipe, optional

3 Combustion air silencer, optional

4 Flexible exhaust pipe, di = 24 mm

5 Exhaust silencer, optional

6 Exhaust end pipe with end sleeve

7 Hose clip

8 Combustion air pipe connection

9 Exhaust connection

max. 2 m

min. 0.2 m

max. 2 m

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 51 52

No comments

Eberspracher Airtronic D5 Service Manual Page 19